สนุกคาสิโน

Autofrettage in pressure sensors ensures zero-point stability

In the manufacturing operation of pressure sensors, autofrettage denotes the procedure of active ?overload? by subjecting the pressure sensor selectively once or many times to a pressure above the nominal pressure range. This technique is applied, in order to achieve maximum stability, in particular of the zero point, in later operation. Assuming the right design of the sensor, autofrettage enables a long time of trouble-free operation of the sensors even at high load cycles achieving the specified overload range, without leading to zero-point shift or similar effects.
In autofrettage, certain local areas of the sensor, in which during the selective overload the yield point of the sensor material is locally exceeded, become plasticised, resulting in a permanent change of the instrumentation characteristics. This selective influence on the structural conditions by way of autofrettage is an integral portion of the development of the sensor and of the associated manufacturing process. Which pressure the sensor is subjected to and how often, must be determined individually for each sensor design by means of an elaborate FEM simulation and extensive test series.
Caution ? no experiments of your own! However, it should not be figured every sensor will automatically benefit from subjecting it to autofrettage. Autofrettage can only be utilized for ductile materials, but for no reason for brittle ones. Conditioning should be scheduled and completed very selectively and with great care through the production stages. Threatened -considered ?overpressurising? of pressure sensors by laymen who like experimenting will not only damage the sensor permanently, but additionally bring about dangerous preliminary damage and subsequently possibly in accidents due to fatigue and bursting of the sensor. In this way, a noticable difference in instrumentation is only going to be achieved, if, by hit or miss.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top