Standard pressure gauges and thermometers generally cope with ambient temperatures down to -40 �C. But what must be the features of a mechanical measuring instrument that works perfectly well in polar climates with even lower temperatures? This is often explained utilizing the WIKA POLARgauge� for example. This product family has been designed designed for measurement at extremely low ambient temperatures down to -70 �C. The instruments are mainly used in crude oil and gas processing; for instance, in the neighborhood pressure and temperature tabs on pumping stations and pipelines.
Minus 40 �C ? this value is often exceeded faster than one thinks. That is demonstrated with a look to Russia. There, tables with standard temperature values even indicate more than -60 �C for some regions. For mechanical instruments which will be operated in such ambient conditions, two critical points should be observed:
For pressure measurement at extremely low ambient temperatures only available with filled case: The WIKA pressure gauge model PG23LT.
1. The case filling
A measurement at extremely low ambient temperatures requires filled-filled measuring instruments. The liquids useful for this protect the instrument from condensation formation within the case caused by temperature fluctuations. They thus avoid the window from frosting, so that the measured value can be read safely.
However, the majority of silicone oils used for this purpose commence to solidify at temperatures below -40 �C. The movement then no longer works, or may also freeze. Application-aligned monitoring of the parameters (e.g. process pressure) can no longer be ensured.
Therefore, for the POLARgauge� series a particular low-temperature silicone oil has been specified. Sneaky remains in circumstances that allows correct measurement and measured value display, even at -70 �C.
The case of the POLARgauge� model PG23LT (r.) compared to a typical version (l.): It does not have any elastomers.
2. The elastomers
Elastomers are found in every mechanical pressure gauges or thermometers. They provide a secure sealing between your individual components. In Incapable , they are the flat gasket at the window, sufficient reason for pressure gauges additionally the blow-out device on the rear of the case and the vent valve for pressure compensation.
However, the sealing materials used in standard designs cannot durably withstand very low ambient temperatures. They become brittle over time and lose their sealing properties. This results in the event filling escaping. This, subsequently, leads to the formation of condensation and the frosting of the window.
Therefore, in the development of the POLARgauge� series, elastomers have already been eliminated in every critical points. The seal between your window and case is made of a special material. It is adapted to extremely low ambient temperatures. The vent valve has a stainless steel cap.
Summary of the WIKA POLARgauge� series
Note
You can get further information on the POLARgauge� series on the WIKA website via the following links. The product family currently comprises four instrument types: The Bourdon tube pressure gauge model PG23LT, the differential pressure gauge models 733.51, 733.31 (filled versions of the models 732.51, 732.31), the bimetal thermometer model 55 and the gas-actuated thermometer model 73. Thus, the right variant is available for every application. Would you like to buy differential pressure gauge models? Inside our WIKA online-shop you will discover a few of our standard designs. Should you have any further questions, your contact will gladly assist you to.g